The XPR-10AXLS Offers Extended Height PLUS 75″ Lifting Height
10K car lifts don’t offer taller lift carriages or get easier to work under than this. If you need maximum security and an extended working height that’s>
This model is truly something to get excited about. If your shop has the overhead clearance—at least 13’—the XPR-10AXLS might be the best lift you ever purchase. The big n’ tall techs in your shop won’t forget it!
Direct-Drive technology
The XPR-10AXLS offers tandem performing, low-pressure HVLP direct-drive cylinders that replace the lifting chains and screw-type mechanisms often featured on other two-post lifts. These direct-drive cylinders prevent leaks, are more reliable and run more smoothly than other systems too. Two-post lift operators generally prefer our Direct-Drive technology, as it requires fewer moving parts than chain-over lifts. Hydraulic fluid gets pressurized, starting at the power unit and flowing through the hollow cylinder rods. The downward motion of the piston rod raises the massive 75″ lifting height while dual-synchro equalizers ensure a safe, even, worry-free lift.
Two-Stage telescoping screw pad assembly kit
BendPak’s two-stage telescoping screw pads are second-to-none in strength and durability. That’s good, because we hope you’re going to be using this lift for decades. Gouge and tear-resistant polyurethane pads improve safety and ensure you’re not constantly replacing equipment. We even throw in a set of 63 mm stackable adapters when you purchase the XPR-10AXLS.
Low-profile, dropped-end frame contact pads
Extremely low-profile contact pads are well-suited for compacts and sport cars. The dropped-end frame design makes your two-post lift arguably the most versatile lift ever made.
Triple-telescoping front arms and two-stage rear arms
Increases overall arm positioning for lifting a variety of wheelbases. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM-recommended pick-up points and wide and/or narrow configurations.
Features:
- Lift arms shown with optional foot guards
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Single‐piece columns
- Dual hydraulic direct‐drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59″ tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17″ x 19″ A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Single‐point safety release
- Safety locks in each column spaced every 3″
- Automatic overhead shutoff
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2″ aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- ALI Certified
Warranty
Specifications
Capacity | |
Lifting Capacity* | 10,000 lbs. (4,536 kg) |
*Max Capacity / Front Axle | 5,000 lbs. (2,268 kg) |
*Max Capacity / Rear Axle | 5,000 lbs. (2,268 kg) |
Rise | |
A – Rise: | 75” (1,905 mm) |
B – Rise + Pad Only: | 79.75” (2,026 mm) |
C – Rise + Pad + 63 mm Adapter: | 82.75” (2,102 mm) |
D – Min. Height + Pad: | 4.75” (121 mm) |
Time to Full Rise: | 50 seconds |
Outside Dimensions | |
E – Height Overall: | 157” (3,988 mm) |
F – Width Overall: | 137” (3,480 mm) or 145” (3,683 mm) |
G – Outside Columns: | 133.25” (3,385 mm) or 141.25” (3,588 mm) |
Inside Dimensions | |
H – Inside Columns: | 106.25” (2,699 mm) or 114.25” (2,902 mm) |
I – Drive-Thru Clearance: | 93.75” (2,381 mm) or 101.75” (2,584 mm) |
J – Floor To Overhead Switch: | 147” (3,734 mm) |
Arms & Pads | |
K – Front Arm Reach: (MIN) | 23.5” (597 mm) |
K – Front Arm Reach: (MAX) | 43.75” (1,111 mm) |
L – Rear Arm Reach: (MIN) | 40.25” (1,022 mm) |
L – Rear Arm Reach: (MAX) | 58” (1,473 mm) |
Screw Pad Adjustment: | 2” (51 mm) |
Max Load Per Arm | 2,500 lbs. (1,134 kg) |
Power Unit | |
Motor: | 220 VAC / 60 Hz / 1 Ph |
Noise: | 45 dB |
Shipping
- Delivery Time: This item ships directly from the manufacturer – Please allow 2-3 weeks for delivery time
- Residential Delivery: This item may only be shipped to a business address and a forklift must be available to unload.
- Delivery: Will be delivered truck and will require a forklift to unload. You must have a forklift to unload from truck.
Reviews
There are no reviews yet.