Versa Cut 40-Amp Plasma Cutter
Enjoy professional cutting power on small and medium metal fabrication projects by choosing the new and improved Eastwood Versa-Cut 40 Plasma Cutter. This portable plasma cutter has a 40-amp adjustable output to cleanly slice through steel from 24-gauge to 3/8-inch thick. You can use it on stainless steel and aluminum, too. The Versa-Cut 40 weighs just 24 pounds, requires only 5-7 CFM of compressed air and can plug into a 120-volt or 240-volt power input, making it an exceptionally versatile and portable unit that you can bring anywhere it’s needed.
Whether you’re a passionate automotive restorer, industrial repairman or metal artist, a mid-duty plasma cutter is a must for your workbench. The Trafimet CB50 torch has a 20-foot cable for maneuvering as you create intricate cuts that mechanical cutters can’t match. A 60% duty cycle gives you plenty of time to complete long cuts. Our confidence in the quality and performance of this machine is shown by the 3-year warranty, 90 day return policy and our lifetime tech support.
This new and improved machine includes 2T/4T modes for smoother long cuts, a breaker switch, digital amperage readout for increased precision as well as modern IGBT Inverter Technology. Plus it’s lighter and more portable than ever!
The Eastwood Versa Cut 40 Amp Plasma Cutter Features:
- Works with 120v or 240v AC input
- Easily slices through metal up to 3/8″ thick
- 20′ torch cable; 10′ ground cable with clamp
- Rated 40-amp output
- Uses common consumables that are available at Eastwood or most welding supply stores
- Lightweight and portable at less than 24 lbs!
- 2T/4T Torch Mode for smoother long cuts
- Digital amperage readout for increased precision
- Durable 60% Duty Cycle @ 40 amps on 240v and 60% @ 30 amps on 120v
- Backed by Eastwood’s no-hassle 3-year warranty
Premium Metal Cutting Power
This innovative, affordable, plasma cutter was designed and developed by Eastwood’s own R&D staff and tested in-house on the same type of real-life projects you’ll use it for. It doesn’t matter where you need to work, because this plasma cutter’s voltage-sensing technology lets you use either a 120v or 240v outlet with our adapter cord. It can cut through 1/8-thick metal on 120v power, enough for thin-gauge sheet metal and light fabrication. This portable plasma cutter is lightweight as well, weighing less than 24 pounds so you can easily bring it along or plug it into a generator.
Inverter technology offers superior arc stability and plasma cutting power. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results. With a duty cycle of 60 percent, this plasma cutter will cut at 40 amps for up to six minutes before it needs to cool. It also requires just 5 to 7 cfm of air at 60 psi, which can be supplied by common shop compressors. Amperage and air pressure is easily adjusted on the front of the unit.
Warranty
Click here for warranty
Specifications
Input: | 120 VAC, 50/60 Hz and 240VAC 50/60 Hz |
Power Cord Receptacle Plug: | NEMA 6-50R |
Output: | 40 Amps |
Duty Cycle on 240V: | 60% @ 40 Amps and 100% @ 31 Amps |
Duty Cycle on 120V: | 60% @ 30 Amps and 100% @ 23 Amps |
Cooling Method: | Fan |
Torch: | Trafiment CB50 |
Torch Tip: | 0.1mm |
Max Cut: | 3/8″ |
Air Requirements: | 5-7 cfm @ 20 – 60 psi |
Torch Cable Length: | 20′ |
Power Cable Length: | 6′ |
Plug Type: | NEMA 6-50P |
Ground Cable Length and Gauge: | 10′ long, 5 gauge wire |
Unit dimensions: | 14.06″ Long X 8.46″ Wide X 14.69″ Tall |
Unit weight: | 23.6 LBS |
Reviews
There are no reviews yet.