QA1 FRONT SUSPENSION KIT, 73-87 C10, SGL ADJ 750 LB SPRINGS 52623-S750 Quick Delivery

Upgrade C10’s driving feel and performance while getting the perfect stance. This kit has everything you need to convert your Chevy Square Body’s front end to coil-overs and a tubular crossmember with rack-and-pinion steering. It’s a great way to overhaul your C10 suspension in one go, giving you adjustable ride height for the perfect stance with up to 8″ of drop. All while dialing in the>

Rack and Pinion Steering

Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability.

Increased Ground Clearance

The crossmember and control arms make your undercab rails the truck’s lowest point. New upper shock mounts increase travel for a great ride and performance, even at low ride heights.

Adjustable Shock Valving

Single-adjustable shocks make it easy to tune your ride quality in seconds with the twist of a knob.

Easy, Bolt-In Installation

The crossmember comes powder coated and ready to install. No need to cut or weld your frame. It easily locates the steering rack, and you can choose mounts (sold separately) for common engines.

Modular Engine Mounts

Chooose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft. Kits are available for small block Chevy, big block chevy and LS applications. DIY mounts are also available if you want to customize the location of your engine.

Fitment Notes

• If you already have QA1’s coil-over system, you can find retrofit kits to use your existing components
• Total drop range depends on wheel/tire fitment
• Will require you to trim inner fenders
• Engine mounts are year-range specific to maintain OE bellhousing location
• Optimized bump steer settings require at least 18″ wheels
• 18″ wheels can run up to 6″ of backspacing
• 20″ wheels can run up to 7″ of backspacing
• Requires use of 1973-1987 C10 spindles
• May require different headers and oil pan (Stock SBC and BBC pans fit)
• Steering shaft is not included
• May require new power steering hoses depending on fittings, pump and engine placement

Specifications